Respirable Silica Dust Exposure of Migrant Workers Informing Regulatory Intervention in Engineered Stone Fabrication.

Background: Silicosis among workers who fabricate engineered stone products in micro or small-sized enterprises (MSEs) was reported from several countries. Workplace exposure data of these workers at high risk of exposure to respirable crystalline silica (RCS) dust are limited. Methods: We surveyed workers performing cutting, shaping and polishing tasks at 6 engineered stone fabricating MSEs in Sydney, Australia prior to regulatory intervention. Personal exposure to airborne RCS dust in 34 workers was measured, work practices were observed using a checklist and worker demography recorded. Results: Personal respirable dust measurements showed exposures above the Australian workplace exposure standard (WES) of 0.1 mg/m3 TWA-8 hours for RCS in 85% of workers who performed dry tasks and amongst 71% using water-fed tools. Dust exposure controls were inadequate with ineffective ventilation and inappropriate respiratory protection. All 34 workers sampled were identified as overseas-born migrants, mostly from three linguistic groups. Conclusions: Workplace exposure data from this survey showed that workers in engineered stone fabricating MSEs were exposed to RCS dust levels which may be associated with a high risk of developing silicosis. The survey findings were useful to inform a comprehensive regulatory intervention program involving diverse hazard communication tools and enforcing improved exposure controls. We conclude that modest occupational hygiene surveys in MSEs, with attention to workers' demographic factors can influence the effectiveness of intervention programs. Occupational health practitioners should address these potential determinants of hazardous exposures in their workplace surveys to prevent illness such as silicosis in vulnerable workers.

Occupational Safety and Health Staging Framework for Decent Work.

The 2030 United Nations Goal 8 for sustainable development focuses on decent work. There is utility in identifying the occupational safety and health aspects of Goal 8, as they pertain to the four pillars of decent work: job creation, social protection, rights of workers, and social dialogue. A workgroup of the International Commission on Occupational Health and collaborators addressed the issue of decent work and occupational safety and health (OSH) with the objective of elaborating a framework for guidance for practitioners, researchers, employers, workers, and authorities. This article presents that framework, which is based on an examination of the literature and the perspectives of the workgroup. The framework encompasses the intersection of the pillars of decent (employment creation, social protection, rights of workers, and social dialogue) work with new and emerging hazards and risks related to various selected determinants: new technologies and new forms of work; demographics (aging and gender); globalization; informal work; migration; pandemics; and OSH policies and climate change. The OSH field will need an expanded focus to address the future of decent work. This focus should incorporate the needs of workers and workforces in terms of their well-being. The framework identifies a starting point for the OSH community to begin to promote decent work.

Exposure to 4,4'-methylene bis (2-chloroaniline) (MbOCA) in New South Wales, Australia.

OBJECTIVES: This study was conducted to determine the level of exposure of 4,4'-methylene bis (2-chloroaniline) (MbOCA) in New South Wales (NSW), Australia. METHODS: An integrated occupational hygiene and biological monitoring program were used to assess the workers' exposure to MbOCA via inhalation, ingestion and dermal contact. This was conducted by personal air monitoring, static air monitoring and surface contamination monitoring of the work environment and biological monitoring of the workers' exposure to MbOCA at nine workplaces in NSW. RESULTS: The air monitoring results for MbOCA gave a geometric mean (GM) of 0.06 µg/m3 and a geometric standard deviation (GSD) of 2.70 and a 95% confidence interval of 0.29 µg/m3. The surface contamination in the main work area showed the highest contamination with a GM of 74 ng/cm2 and a GSD of 17 and a 95% confidence interval of 7,751 ng/cm2. Biological monitoring showed a GM of 0.89 µmol/mol cr and a GSD of 11.9 and a 95% confidence interval of 52 µmol/mol cr. This indicated that 13% of the workers were over the SafeWork NSW Biological Occupational Exposure Limit of 15 µmol/mol cr. CONCLUSIONS: Workers' exposure through inhalation was minimal; however, evidence from biological monitoring of MbOCA suggested that the main contributing factor to exposure was skin absorption. This was attributed to poor housekeeping and inadequate personal protection. Improvements in these areas were recommended, and it was also recommended to improve the awareness of the workers to the adverse effects to their health of exposure to this carcinogen.

Exposure assessment in SMES: a low-cost approach to bring OHS services to small-scale enterprises.

There is increased attention to improving occupational health and safety in small to medium-sized Enterprises (SMEs). The Workers Health Centre, a not-for-profit OHS service in western Sydney, assessed workplace exposures in two SMEs following intervention by regulatory agencies. A low-cost monitoring program for noise, airbone dust, fibers and chemicals was conducted at these two metal working industry workplaces. Results showed that exposure to the hazards were above the statutory limits and there was generally an unhealthy access to OHS information by the predominantly immigrant or low literate worker population, were identified. The potential for using a program of low-cost exposure assessments, accompanied by a strategy to provide OHSs information for workers in small-scale enterprises, is discussed.